Vacuum dust Filter Cartirdge
The Process: Vacuum is a negative pressure condition created to remove gas molecules from a process work chamber. The objective is to provide a clean space, free of gases that can affect product quality and process performance. Vacuum is used for a number of industrial products, processes and applications.
Lubricated vs. Non-Lubricated: Vacuum Pumps are generally offered in an oil-less or oil-lubricated version. Oil- lubricated vacuum pumps have many advantages if they are properly maintained. They can usually provide 20% higher vacuum because the lubricant acts as a sealant. The life of an oil-lubricated vacuum pump is usually extended by 50% due to cooler operation and better protection against corrosion from condensed water vapor.
All Pumps Require Filtration Protection: A vacuum pump, whether it is oil-less or not, requires Exhaust filtration protection. One requirement of vacuum pump maintenance is making sure that the operator provides and maintains a filter for the vacuum exhaust. Regardless of the type of vacuum pump you have, using a exhaust filter will ensure a cleaner work environment.
Our vacuum pump exhaust filter cartridges remove heavy concentrations of extremely fine oil droplets from vacuum pump exhaust to permit pumps to discharge into clean work areas or recycle clean gas to process.
Coalescing Filtration - How It Works.
At the heart of the Vacuum Pump Exhaust Filter is the completely disposable coalescing element. Made entirely from borosilicate glass microfiber and silica binder, it is compatible with all compressor lubricants and will operate at temperatures up to 120°C.
The microfiber element has a two-layer structure, an inner particle capture-layer and an outer drainage-layer. Oil droplets remain mobile once captured and travel through the fine-pored capture-layer, along the intersecting microfibers, growing in size as they progress.
These coalesced droplets are transferred to the large-pored drainages-layer, from where they drain by gravity into the filter bowl. Oil collected in the filter bowl can then be drained and reused
Our disposable Borosilicate Microfiber Filter elements are specifically designed for all vacuum exhaust application. The filters have an efficiency rating of 99.99% at 0.03 micron and are designed to have an initial dry pressure drop of less than 2 psi when sized correctly.
Since SS Filters Microfiber Filter Elements operate at their initial retention efficiency even when wet with oil, the filter elements need to be changed only when the back pressure on the pump reaches an unacceptably high level as a result of build-up of particles in the filter elements. There usually is a very low particle contamination in vacuum pump exhaust, so filter element life is quite long.
Features & Benefits:
- Easily mounts directly to exhaust port of vacuum pump.
- Rugged Construction - Easy to install.
- Low cost, completely disposable elements.
- Recover Expensive Lubricating Fluids.
- Low cost, completely disposable elements.
- Precision matrix of synthetic microfibers provides consistent pore configuration around cartridge.
- Gradient density microfiber, with a tapered pore structure.
- Maximum efficiency and dirt-loading capacity with minimal pressure drop.
Products & Specifications:
| Micron Rating | 0.03 to 0.3 micron |
|---|---|
| Length of Filter | 50 mm to 1000 mm |
| Max Operating Temperature | Up to 120°C |
| Outer Dia | 25 mm to 200 mm |
SS FILTER PVT. LTD